Mini prisms with tilt function

Mini prisms with tilt function

The mini prisms can be easily glued or fixed with plugs and screws, even on difficult surfaces, such as glass and marble facades, steel beams, rails, gas and oil pipes, etc.

The following accessories are offered for this product:
Fixed point (article RSFP-X80 )
Protective cover with or without magnetism (RSPC10, RSPC10M & RSPC20 , RSPC20M )

When using total stations

• The prism can always be adjusted precisely with the measuring instrument
• The prism can be rotated within a radius of 180°, which makes it possible to use the same survey point from different directions
• Bridges, facades and many other structures can be monitored more precisely
• Multiple prisms can be combined with each other thanks to the integrated connection system, making it possible to map from different directions without having to turn the prism

When using total stations

• Permanent measurements can be carried out during construction work
• Sedimentation measurements are possible on railway tracks under load of railway traffic

When using mini prisms , the RSMP280 in ATR mode achieves ranges of 300 meters to 500 meters.

When using mini prisms , the RSMP380 is obtained in the ATR mode ranges of 500 meters to 700 meters.

The areas are dependent on the unit and may be negatively affected by weather and environmental conditions.

If there are already known measurement points, measurement with a total station can achieve intervals of up to 1000 m.
Depending on the focus, ranges of approximately 200 m are achieved for measurements in manual mode.

RSMP280 with 17.5 mm mini prism: offset: -11.0 (minus 11) [Leica +23.4], tilt axis height: 30 mm RSMP380 with 25.4 mm mini prism: offset: -16.9 (minus 16.9) [Leica + 17.5], tilt axis height: 30 mm