Mini prism can be rotated and tilted

Mini prisms RSMP290 and RSMP290M (M stands for magnetic)

The prisms are Ø 17.5 mm and can be rotated and tilted.

RSMP290 and RSMP390 can be quickly and easily attached even to difficult surfaces, such as glass and marble facades, gas and oil pipes, etc. or attached with plugs and screws. A magnetic version of the base plates is also available for easy installation on steel structures.

The following accessories are offered for this product):
Fixed point (article RSFP-X90 )
Protective cover with or without magnetism (RSPC10, RSPC10M & RSPC20 , RSPC20M )

When using robotic total stations

• The prism can always be adjusted precisely with the measuring instrument
• The prism can be rotated within a radius of 180°, which makes it possible to use the same survey point from different directions
• Bridges, facades and many other structures can be monitored more precisely
• When robotic total stations are used, permanent sedimentation measurements can be performed during construction

When using the mini prism, the RSMP290 in ATR mode obtains intervals of
300 meters to 500 meters.

When using the mini prism, the RSMP390 in ATR mode obtains intervals of
500 meters to 700 meters.

The areas are dependent on the unit and may be negatively affected by weather and environmental conditions.

If there are already known measurement points, measurement with a total station can achieve intervals of up to 1000 m.
Depending on the focus, ranges of approximately 200 m are achieved for measurements in manual mode.

RSMP290 with 17.5 mm mini prism: offset: -11.0 (minus 11) [Leica + 23.4], tilt axis height: 45 mm RSMP390 with 25.4 mm mini prism: offset: -16.9 (minus 16.9) [Leica +17.5], tilt axis height: 45 mm