Cable locator CAT4+ & GENNY4

Product information Cable locator CAT4+ & GENNY4

CAT4+ & GENNY4 is suitable for construction & excavation contractors, industries, electrical installers for easier cable laying. Built in the same format and largely compatible with previous CAT versions. With a complete kit CAT4+ & GENNY4 you have the option of both "passive" searching with the receiver to easily detect cables underground without sending a signal and active searching with GENNY4. C.AT.4+ & GENNY4 are primarily intended for easier cable laying. They are easy to use and very robustly built to ensure many years of use in harsh environments. Receiver CAT4+ can also be used with various transmitter probes for following plastic & concrete pipes. CAT4+ has a digital display with built-in backlight that shows the signal strength and a built-in speaker that gives an audible tone. With CAT4+ you can also measure the depth of a cable or a transmitter probe. GENNY4 can send a signal inductively without physical contact with the cable or with direct connection to a cable or e.g. a VA pipe. Functions that have been added to CAT4+ & GENNY4 compared to previous models include an additional high frequency > 100 kHz superimposed on the standard frequency of 33 kHz and a so-called BOOST function that increases the GENNY4's output power up to 1 Watt. Both of these new functions make it very easy to search for cables with small diameters such as electrical/telephone services and search wire for fiber networks. CAT4+ has a dynamic overload protection that enables searching even in areas with a lot of interference. A complete kit is always delivered complete with CAT4+ receiver, GENNY4 transmitter, direct connection cables, ground spikes and a padded carrying case. Swedish instructions are located along the sides of the instruments and a Swedish user guide is included.

CAT4+ & GENNY4 Technical data

• 3 passive search modes: Power cable = 50 Hz, VLF radio and the combination mode AvoidanceScan
• 2 active frequencies 33kHz and superimposed frequency > 100 kHz for use with GENNY4 or transmitter probes
• Depth measurement to cable or transmitter probe with the value directly readable in meters.
• Uses alkaline batteries, 2 pcs 1.5 Volts R20
• StrikeAlert™, warns of shallow cables (optional)
• Swedish instruction labels along the side of the instrument and Swedish user guide

GENNY4 transmitter, Technical data

• 2 active frequencies 33 kHz and another high frequency > 100 kHz, both inductive & conductive.
• Continuous or pulsating tone switch
• Output power 0.1 W, in BOOST mode 1 W.
• Uses alkaline batteries, 4 pcs 1.5 Volts R20
• Protection class IP54
• Direct connection cables with crocodile clips, neodymium magnet and ground spike included