Studs, Nails, Screws and Washers

PK nail with centering hole, 30mm, 50mm, 75mm Material: galvanized and hardened steel Length 30 mm Length 50 mm Length 75 mm S...

Flat head nail with centering hole, two lengths Made of hardened galvanized steel. 10TK-25 Length: 25mm Shaft width: Ø 4 mm Head: ...

Vertical stud Fixed stud 19mm, stainless steel Placed vertically, well fixed in the substrate. The top should protrude about 5-20mm Pre-dri...

Wall fixing stud Horizontal stud 19 mm with ball-shaped head, in stainless steel NOTE! Wall fixing studs are only available as drilled! Pl...

Geospik, 75 mm "Measuring point"

Brass wall bolt for wall, M10 Flat brass stud with collar with internal M10 thread. Marking: "MEASUREMENT POINT" Length: 46 mm Head: Ø ...

Bridge fixing stud 10×100 mm, 3 grooves Brofix stud in brass. Can also be sold in stainless steel upon request.

Wall bolt with M8, WHITE Wall bolt for height and position control. Also called expander and locking screw. Made of brass with white p...

Convergence measurement bolt with Leica mount 12mm Leica mount Length: 250mm Diameter (widest part): 22mm Material: galvanized steel ...

Centering stud Centering stud for marking pipes in both 3/4" and 1" versions.

Geospik, 75-100 mm "Unmarked"

Geospik, 75 mm "Boundary Point"

Acid-proof bolt Acid-resistant bolt for aggressive environments External thread: M16 Internal thread: M10 Stop screw to protect the int...

MS-dubb i mässing med centreringshål Mått: D= 8 mm, L= 43 mm, Huvud 30 mm/ 2 mm Material: Tillverkas från korrosionsbeständig kopparlegerin...

POLY fixing stud 100mm - external M8 Polyfix stud with external M8 thread Length: 100mm Product weight: 150g Mounted on Polyfix screw 6...

ID tag for PK nail “Neutral” PK nails: 10LK-30 , 10LK-50 , 10LK-75.

Post mount with M10 bracket 108-114mm Used to attach prisms to lamp posts, downpipes, fence posts, road signs, etc. Remove the rubber covering ...

Flat head nail Galvanized and hardened steel nail. Choose between two different lengths: 10FK-4 Length: 40mm Head: Ø7 mm Diamete...

Nail with half-round head and centering hole Material: galvanized and hardened steel Length: 55mm, 75mm, 100mm Shaft width: Ø 8.5 mm Hea...

POLY fixing screw 65mm - M8 POLY-fix stainless steel screw M8 for Polyfix stud. Attached with chemical anchors or two-component adhesive. ...

Impact anchor Sormat LAL+ M10 with collar Designation: LAL+ Thread diameter (M): M10 Drill diameter: 12 mm Length: 40mm Surface treat...

Plugg till MS-dubb Används tillsammans med MS-dubb i 11H-serien Borrdiameter:12 mm Borrdjup: 45 mm Material: högkvalitativ polyamid P...

Adhesive wall mount with M8 thread With internal M8 thread for mounting, for example, Polyfix stud (2110-10) or a Leica adapter (8911) The ...

Impact anchor Sormat M10, LAH Acid-resistant A4, without collar, 40mm Acid-resistant Designation: LAH Thread diameter (M): M10 Drill d...