Reference line marking

Reference line marking (RS95 and RS96) was developed specifically for setting out work on a hanger or on the floor plate. Accurate measurement of the survey point on the hanger or floor plate often causes great problems, especially in the "final phase" with the last 5-10 cm. The work is very time-consuming due to the constant side to side, back and forth with the prism rod and the prism rod must always be exactly vertical. The RS95 or the foldable RS96 is placed on the ground and the measuring tape can use the measuring scales to quickly and accurately reproduce and transmit the inspector's instructions.

• For additions to the floor slab – especially the last 5-10 cm can be measured quickly and accurately
• The surveyor's dimensional data can be transferred precisely to the floor slab
• There is no need for precise plumbing of the prism pole
• Orientation scale for left and right - the number 10 corresponds to the axis
• Orientation scales for backward and forward
• Foldable: fits easily in your pocket (RS96 + RS97 only)
• RS95, RS96: The intervals are device dependent and may be negatively affected by weather and environmental conditions.

The following heights must be taken into account when measuring :
RS95: From the reflective target crosshair to the floor plate 30 mm
RS96: From the reflective target crosshair to the floor plate 20 mm
RS97: From the crosshair on the non-reflective target to the floor plate 20 mm